Driving
5.5 Separate steering
5 - 60 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
5.5.1 Switching to separate steering
Always switch to separate steering when
– Driving with the rigged truck crane
– Steering at low speed
You can switch to separate steering only at low speeds.
• Open the Driving (1) menu.
• Select and confirm the symbol for the
desired steering mode.
The symbol (1) indicates the selected steering
mode, e.g.
Driving around corners.
If the error symbol is displayed, contact
Manitowoc Crane Care; Ã p. 8 - 24.
H
When separate steering is switched on, the speed is limited to about
20 m/h (12 mph).
G
Risk of accidents when driving on-road with unlocked steering
After driving with separate steering, change over immediately to normal
steering mode. The locking status for normal steering mode is only
restored once the on-road driving symbol is displayed.
2 Manual
3. and 4th axle line manually steered
3 Driving around corners
3. and 4th axle line automatically
steered
4 Crab travel mode
3. and 4th axle line automatically
steered
To Next Page
Loading...
Need help?
General
