EasyManuals Logo

Manitowoc GROVE GMK4090 User Manual

Manitowoc GROVE GMK4090
994 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
Driving
5.7 Heating and air-conditioning system
5 - 70 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
5.7.3 Auxiliary water heating system
H
The batteries will be drained if you operate the auxiliary heater with the
engine switched off. You must recharge the batteries at shorter intervals if
you use the auxiliary heater frequently.
Further information on the operation of the auxiliary water heating system
is provided at the address
Webasto.com.
You can also scan the following QR code.
You can use the auxiliary water heater to:
– preheat the engine or
– pre-heat the engine and driver's cab.
Preheating the
engine
If only the engine is to be preheated, adjust the heating system as follows:
• Switch (1) pushed in at the bottom.
• Switch (2) to position Fan off.
• Switch (3) to Warm setting.

Table of Contents

Other manuals for Manitowoc GROVE GMK4090

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc GROVE GMK4090 and is the answer not in the manual?

Manitowoc GROVE GMK4090 Specifications

General IconGeneral
BrandManitowoc
ModelGROVE GMK4090
CategoryConstruction Equipment
LanguageEnglish

Related product manuals