Driving
5.2 Operating the transmission
Operating manual 3 302 736 en 5 - 25
GMK4090
xx.xx.xxxx
5.2 Operating the transmission
The transmission automatically controls all gear changes. However, gears
can be changed manually at any time.
5.2.1 Switching on
When the ignition is switched off, the transmission must always be in the
neutral position N.
• Shift to position N.
If you switch on the ignition in positions D or R, malfunctions may occur.
• Switch on the ignition.
The electronic transmission system is switched on, and a warning buzzer
sounds for several seconds.
To Next Page
Loading...
