Crane operation
11.6 Settings and displays for crane operation
Operating manual 3 302 736 en 11 - 131
GMK4090
xx.xx.xxxx
11.6.10 Displaying the operating hours
You can view the total operating hours for all power units in the Operating
hours
menu. You can also delete the recorded operating hours.
The total operating hours cannot be deleted.
• Open the Operating hours (1) menu.
Displays
– The value (1) indicates the total operating
hours, for example, 1,680 hours.
– The value (2) shows the operating hours,
which can be reset.
Exception: The value below the symbol (3)
indicates how often the cycle
Unlock telescopic
section
has been performed, for example,
13,750 times.
The value (4) shows the cycles; this can be
reset.
Reset
The displayed operating hours/cycles (3) can
be reset.
• Enter the keycode in the fields (1) and con-
firm with (2).
You can perform the following actions for
power units:
– Select individually (3)
– Select all (4)
• Reset the selected operating hours with but-
ton (5) or (6).
To Next Page
Loading...
