Manitowoc GROVE GMK4090 - Remote Control

Operating elements for crane operation
9.2 Short description of the operating elements
9 - 130 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
9.2.21 Remote control
H
Operating with the remote control is only enabled for the Standard slewing
range type.
Remote control menu
Remote control display
1–Orange:
Remote control connected
1–Green:
Remote control switched on.
CCS operation from the cab is blocked.
Symbol (2) is shown green on all
menus.
1–Off:
Remote control deactivated
Other information;
à Separate operating
manual
1–Green:
Remote control switched on.
CCS operation from the cab is blocked.
Symbol (2) is shown on all menus.
1–Off:
Remote control deactivated
Other information;
à Separate operating
manual