Overview
1.5 Technical data
Operating manual 3 302 736 en 1 - 19
GMK4090
xx.xx.xxxx
1.5.6 Superstructure
Main hoist
Auxiliary hoist
Slewing gear
Derricking gear
s
Drum diameter: 330 mm (13 in) (rope centre to rope centre)
Rope diameter: 16 mm (0.63 in)
Rope length: 220 m (722 ft)
Max. rope pull: 50 kN/line (11,241 lbf)
Power unit group: M 3 (to ISO 4301 - 2)
Load spectrum: L 1
Factor of the load spec-
trum
Km = 0.125
Theoretical service life: D = 3,200 h
Drum diameter: 330 mm (13 in) (rope centre to rope centre)
Rope diameter: 16 mm (0.63 in)
Rope length: 220 m (722 ft)
Max. rope pull: 50 kN/line (11,241 lbf)
Power unit group: M 3 (to ISO 4301 - 2)
Load spectrum: L 1
Factor of the load spec-
trum
Km = 0.125
Theoretical service life: D = 3,200 h
Power unit group M2 (to ISO 4301 - 2)
Adjusting angle
(main boom):
-3° to + 82° from horizontal position
Power unit group M2 (to ISO 4301 - 2)