Rigging work
12.11 Other rigging work
Operating manual 3 302 736 en 12 - 153
GMK4090
xx.xx.xxxx
12.11.3 Folding the mirrors in and out, and adjusting them
The mirror must be folded in for driving. You must fold the mirror out and
adjust it for crane operation or driving from the superstructure.
For crane operation
• Adjust the mirrors (1) in such a way that you
have a clear view of the rope running on the
hoisting gears.
• Adjust the mirror (2) so that the rear right
outrigger beam can be observed clearly
from the crane cab (when the main boom is
raised).
for driving
• Fold the mirrors (1) downwards.
• Fold in the mirror (2) until it does not pro-
trude over the side of the carrier.
G
Risk of accidents due to exceeding the permissible dimensions
Fold the mirror in for driving. The overall width specified for on-road driv-
ing is exceeded if the mirror is folded out.
To Next Page
Loading...
Need help?
General
