Crane operation
11.7 Working range limiter
11 - 140 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
11.7.5 Enter limit values – for the slewing range
– For unknown limit values, you can approach a shut-off point and accept
the current slewing angle as Accept limit value.
– If the limit values are known, you can Manually enter limit value.
Switch off monitoring
Before you enter a limit value, you must
switch off the monitoring.
• Select and confirm the symbol (1).
The
Slewing range monitoring is switched
off.
Displays
Permissible slewing range
– The slewing angle A limits slewing to the
left.
– The slewing angle B limits slewing to the
right.
The permissible slewing range (6) – green – is
the angle from A clockwise to B.
G
Risk of accident due to incorrectly set limit values
When entering the limit values, please note that movements can still take
place even after switching off, which lead further into the shutdown range.
Before crane operation, slowly approach all limit values, check that they are
shutdown in good time and, if necessary, enter new limit values with larger
safe distances.
1, 3, 5 Current slewing angle
2 Limit value for the slewing angle A
4 Limit value for the slewing angle B
To Next Page
Loading...
