Crane operation
11.1 Before operating the crane
11 - 18 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
Switching off the
houselock
• Check that the slewing gear is switched off, and switch if off if it is not;
à Switching off the slewing gear, p. 11 - 16.
• Select the symbol (4).
• Press the button until the symbol (3) is dis-
played –
Houselock switched off.
The display first shows the symbol (1), then
symbol (2) in the intermediate position and
then symbol (3) when the houselock is
switched off.
S
Risk of damage during slewing
Always switch off the slewing gear before you operate the houselock. The
system will be damaged if the superstructure is slewed during the locking
procedure.
To Next Page
Loading...
