Overview
1.10 Identification
Operating manual 3 302 736 en 1 - 35
GMK4090
xx.xx.xxxx
The following plates and numbers are attached to the truck crane for iden-
tification purposes:
The location of the identification numbers on removable rigging parts (for
example, counterweights, lattice extension) is described in the correspond-
ing chapters or in the relevant operating manual provided.
1 Serial number and crane type
2 the CE mark, which is only applicable for truck cranes whose equip-
ment and configuration complies with the guidelines and standards
specified in the supplied EC Declaration of Conformity.
3 Driver's cab serial number (at the strut of the door access)
4 Chassis number and crane type (at the passenger's seat)
5 Chassis number (front of the first axle line in the frame)
To Next Page
Loading...
Need help?
General
