Rigging work
12.11 Other rigging work
Operating manual 3 302 736 en 12 - 157
GMK4090
xx.xx.xxxx
Camera on the
hoists
This section describes the CCS display as the monitor. Depending on the
version, a separate monitor may also be present.
A camera (1) transmits an image of the main
and auxiliary hoists to the display in the crane
cab.
Camera on the
driver's cab
A camera (1) allows viewing of the non-visible
area in front of the driver's cab.
Depending on the version, the camera image
is shown on the
CCS display or on a separate
monitor.
• Adjust the camera (1) to show the area (2) in
front of the bumper on the display or
monitor.
s
To Next Page
Loading...
Need help?
General
