274 Chapter 29: Panel Connections
PRO Series Live Audio Systems
Owner’s Manual
AES3 sync
input and output connectors for synchronisation with external devices that can
transmit/receive a 96kHz AES3 signal.
Ethernet tunnel section
An external 10Mb/s port (on EtherCon®) allows connection to external non-Midas
equipment, such as hubs and switches.
Note: We recommend that you connect this port after the PRO Series Control Centre
has powered up, see “Powering the system” on page 42.
Ethernet control section
Two 100Mb/s Ethernet control ports (on EtherCon®) let you connect equipment, such
as the Klark Teknik DN9331 RapidE.
AES50 audio
Three AES50,
24-wide, bi-directional
digital audio
EtherCon® ports.
To Next Page
Loading...
