© 2011 MIMAKI ENGINEERING CO.,LTD. 5.1.1 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Test > Test Items > CHECK PATTERN
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
5.1.1 CHECK PATTERN
Outline
Following 12 “CHECK PATTERN” types are printable.
List of CHECK PATTERN
* Pattern of the [DROP CHECK] dose not heve menu of the [Y resolution]-[Drawing color].
100% 50% 25% 6.25%
NOZZLE V-LINE H-LINE SLANT
GRADATE V-1B1W H-1B1W
DROP CHECK
*
No Operation Selectable Values / Description
1
Select a pattern Select a desired one among the check patterns listed above.
2
Select Y resolution 300, 600, 900, 1200 dpi
3
Select X resolution 360, 540, 720, 1080, 1440 dpi
4
Select scan direction and the number
of divisions.
Direction : UNI-D, :BI-D
Divisions : 2, 4, 6, 8, 12, 16, 24, 32 passes
5
Select the Linewidth 1~1500dots(Only as for V-LINE and H-LINE and SLANT)
6
Select the interval of the line. 1~9999dots(Only as for V-LINE and H-LINE and SLANT)
7
Select drawing size *
2
X: 10 ~ 420 mm
Y: 10 ~ 300 mm
8
Select drawing color MCYKWR
9
Start drawing.
[ENTER]: Starts drawing.
[REMOTE]: Selects nozzles and Switches between high speed scanning ON and OFF.
10
During drawing.
[END]: Stop the drawing.
To Next Page
Loading...
