MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.5 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Wipe Suction Pump Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.2.5 Wipe Suction Pump Assy.
 Procedures
1. Turn the main power OFF.
2. Remove the following covers:
• Rear panel
3. Open the Waste Ink Tank Door and disconnect the relay con-
nector.
4. Disconnect the Tube and remove the Wipe Suction Pump Assy.
Screw : P3x8SMW x4
5. Perform the assembly by reversing the disassembly procedure.
 To turn power off, be sure to turn the main power OFF.
 Be sure to wear Protective Glasses and Working Gloves during the work operation.
Wipe Suction Pump Assy.
Disconnect the Tube