MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.7.3 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > UV Parts > Cooling Water Pump
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.7.3 Cooling Water Pump
 Procedures
1. Drain the cooling water completely.
Follow the procedure given in
”4.2.8 EXCHANGE LED UV ”
2. Turn the main power OFF.
3. Remove the UV Cooling Unit.
Follow the procedure given in
” 6.7.2 UV Cooling Unit ”
4. Remove the Cooling Water Pump.
Screw : P3x10SMW x2
5. Reverse the disassembly procedure for reassembly.
 To turn power off, be sure to turn the main power OFF.
 Be sure to wear Protective Glasses and Working Gloves during the work operation.
Cooling Water Pump
Cooling Water Pump
UV Cooling Unit.