MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.7.1 R.2.0 P.3
6.7.1 LED UV UNIT
1
2
3
4
5
6
7
8
9. Remove the DRV PCB Cooling Fan Assy.
(1) Pull the Connector off. (CN4)
(2) Remove the Fixing screw.
(3) Remove the DRV PCB Cooling Fan Assy by pulling it
upward.
10. Remove the Side Cover-R.
• Fixing sccrew x2
11. Remove the Side Cover-L.
(1) Pull the connecter off.
•
LEDUVx2-DRIVE PDB Assy CN5, CN6
(2) Remove the Fixing screws(x2).
DRV PCB Cooling Fan Assy
Fixing screw x2
FAN Connector
CN4
Fixing screw
Side Cover-R
LEDUVx2-DRIVE PCB Assy
CN5, CN6
Side Cover-L
 Perform removal and replacement of LEDUVx2-
DRIVE PCB Assy in this step.
Maintenance Manual > Disassembly and Reassembly > UV Parts > LED UV UNIT
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.