© 2011 MIMAKI ENGINEERING CO.,LTD. 6.1.2 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Covers > Key Panel Assy
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
6.1.2 Key Panel Assy
Procedures
1. Turn the main power OFF
2. Remove the following covers:
• Key Board Cover -Under
3. Disconnect the FFC from the Key Board PCB.
To turn power off, be sure to turn the main power OFF.
The state that excluded Key
Board Cover-Under
Disconnect the FFC
Key Board PCB
When the FFC is connected, be sure not to mistake
the frond and back.
Do not connect it at an angle.