MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 4.2.2 R.2.0 P.2
4.2.2 HEAD ADJUST
1
2
3
4
5
6
7
8
 Outline of Head Slant Adjustment
245
12 34
56
245
192 nozzle
192 nozzle
3 nozzle
 Slant adjust: Normal
 Slant adjust: Fine
150 dpi
150 dpi
(When CMWKWR is set)
X(+)-direction
Specified value:
0±10µm
Enlarged
Bad Good Exam-
Adjust so that the dots in the
overlapping area are in alignment.
Bad Good Exam-
Specified value:
0±10µm
Adjust so that the dots in the
overlapping area are in alignment.
Enlarged
X(+)-direction
Maintenance Manual > Adjustment > Adjustment Items > HEAD ADJUST
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.