MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.8 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Driving Parts > Linear Encorder Scale
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.3.8 Linear Encorder Scale
 Working Procedure
1. Turn the main power OFF
2. Remove the Front Cover.
3. Take the Scale hook off.
• Remove the spring(Scale SP).
4. Remove the attachment on the right side (scale holder R).
5. Remove the Scale hook from the Linear Encorder Scale.
• Remove the two screws.
6. Perform the assembly by reversing the disassembly procedure.
 To turn power off, be sure to turn the main power OFF.
Linear Encoder Scale
Spring(Scale SP)
Scale hook
Remove the screws.
It is sandwiched between plates.