© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.9 R.2.0 P.3
6.3.9 X Gear Box
1
2
3
4
5
6
7
8
14. Remove the X gearbox Assy.
When passing the X gearbox Assy below the Z slide BKTF, use
the available space to tilt the X gearbox Assy as needed.
15. Perform steps 1 through 14 in reverse to install the replacement
X gearbox Assy.
16. At this time, adjust the tension of the timing belt to the tension
before replacement ±10N. (Tightening the adjustment screw on
the X-T pulley will increase the tension.)
17. Turn the power ON.
18. Use the JOG key to move the Y bar forward/back, to confirm
that it moves correctly with no abnormal noise.
19. Perform FEED COMP 2.
Measure the belt tension at the center along the
length of the belt.
Maintenance Manual > Disassembly and Reassembly > Driving Parts > X Gear Box
Model UJF-3042/FX Issued 2010.08.27 Revised 2013.08.01 F/W ver --- Remark
2.0
To Next Page
Loading...
