MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.8 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Capping
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.2.8 Capping
 Working Procedure
 Method to remove cap by unit
1. Turn the main power OFF
2. Remove the following covers:
• Front Cover
• Upper Cover
3. Pull out the tube from the cap from the fitting.
4. Take Cap Base off.
• Screw x4
 To turn power off, be sure to turn the main power OFF.
 Be sure to wear Protective Glasses and Working Gloves during the work operation.
Ink may get in your eyes depending on the working condition, or hand skin may get rough if you
touch the ink.
 Take care not soil the surroundings.
Cap Assy
Cap Assy
Tube from cap
Cap Base