MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.9 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Wiper unit Assy(Belt, Sensor)
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.2.9 Wiper unit Assy(Belt, Sensor)
 Working Procedure
1. Turn the main power OFF
2. Take the Station Assy off, from the machine.
• Refer to 6.2.4 Station Assy.
3. Take the Wiper unit Assy off, from the Station Assy.
 To turn power off, be sure to turn the main power OFF.
 Be sure to wear Protective Glasses and Working Gloves during the work operation.
Ink may get in your eyes depending on the working condition, or hand skin may get rough if you
touch the ink.
 Take care not soil the surroundings.
Wiper Unit Assy
Station Assy
Wiper unit Assy