MIMAKI UJF-3042 - Cn2[1

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.5 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Driving Parts > Slider Relay Cooling Fan Assy
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.3.5 Slider Relay Cooling Fan Assy
 Procedures
1. Turn the main power OFF.
2. Remove the Rear Cover.
3. Disconnect the Connecter from the Slider Relay PCB Assy.
[CN24]
4. Remove the Slider Relay Coolig Fan Assy.
Screw : CS3x20 x2
5. Perform the assembly by reversing the disassembly procedure.
 To turn power off, be sure to turn the main power OFF.
Slider Relay Cooling Fan Assy
Slider Relay Cooling Fan Assy
CN24