MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 3.1.4 R.2.0 P.1
1
2
3
4
5
6
7
8
R.1.1
Maintenance Manual > Workflow > Ink Related Parts > Replacement of Cartridge Guide Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
3.1.4 Replacement of Cartridge Guide Assy.
 List of Replacement Procedures
Item Work operation Description Ref.
Ink
1. 
Discharge of ink Discharge the ink and then clean the ink path and Head.
Perform the steps before the Protective solution
charge in [HEAD WASH] of [#ADJUST].
4.2.5
Power OFF
2. 
Main power OFF –
Covers
3.

Removal of the covers. Remove the Carriage Cover and Rear Cover. 6.1.1
Disassembly
and
Reassembly
4. 
Removal of the Cartridge Guide Remove the Cartridge Guide Assy.. 6.2.6
5.

Replacement of Cartridge Coupling
Assy.
(Perform this process if needed.)
Replace the Cartridge Coupling Assy.. 6.2.7
6. 
Mounting of the Cartridge Guide Mount the Cartridge Guide Assy.. 6.2.6
Covers
7.

Mounting of the covers Mount the covers which have been removed. 6.1.1
Power ON
8. 
Main power ON –
Ink
9.

Ink filling Fill the ink. –
Be sure to wear Protective Glasses and Working Gloves during the work operation.
Ink may get in your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Cartridge Guide Assy.