MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 3.3.3 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Workflow > Electrical Parts > Replacement of ID Contact PCB
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
3.3.3 Replacement of ID Contact PCB
 List of Replacement Procedures
Item Work operation Description Ref.
Ink
1. 
Discharge of ink Discharge the ink in the path of slot applied, and remove all Ink
Cartridges of the Cartridge Unit.
4.2.5
Power OFF
2. 
Main power OFF –
Covers
3.

Removal of the covers. Remove the Rear Cover and Cartridge cover. 6.1.1
Disassembly
and
Reassembly
4. 
Removal of the Cartridge Guide Remove the Cartridge Guide. 6.2.6
5.

Replacement of ID Contact PCB Replace the Cartridge Coupling Assy.. 6.4.7
6. 
Mounting of the Cartridge Guide Mount the Cartridge Coupling Assy.. 6.2.6
Covers
7.

Mounting of the covers Mount the covers which have been removed. 6.1.1
Power ON
8. 
Main power ON –
Ink
9.

Ink filling Fill the ink. –
Be sure to wear Protective Glasses and Working Gloves during the work operation.
Ink may get in your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
ID Contact PCB
ID Contact PCB