MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 5.1.4 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Test > Test Items > PARAM. DRAW
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
5.1.4 PARAM. DRAW
 Outline
Select a parameter, and draw the settings. The selectable parameters are as follows:
 List of PARAM. DRAW
No. PARAMETER
1 SYSTEM PRM
2 MAINTE PRM
3 SERVO PRM
4 FEED PRM.2
5 HEAD PRM
6 INK PRM.1
7 INK PRM.2
8 SCAN PRM
9 WAVE PRM 1 (There is color choice.)
10 WAVE PRM 2 (There is color choice.)
11
WAVE PRM 3(There is color choice.)
12 WAVE PRM 4(There is color choice.)
 For the details of parameters, refer to “4.1.4 Parameter functions” of “SERVICE DOCUMENTS”.