MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.7 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Driving Parts > Tabel Absorption Fan
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.3.7 Tabel Absorption Fan
 Procedure
L
1. Remove the Table and reverse it.
(Refer to“6.3.3 Table” for removing method.)
2. Remove the Cable saddle.
Screw : P3x10SMW x2
3. Remove the Fan Motor.
Screw : CS4x40 x2
4. Perform the assembly by reversing the disassembly procedure.
To turn power off, be sure to turn the main power OFF.
 Be sure to start the work after confirming the working process.
(Refer to “3.2.2 Replacement of Tabel Absorption Fan”)
Table Absorption Fan Assy
Table backside
Remove the Cable saddle
Fan Motor