MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 3.2.1 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Workflow > Driving Parts > Replacement of Z-Driving Screw
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
3.2.1 Replacement of Z-Driving Screw
 List of Replacement Procedures
Item Work operation Description Ref.
Advance prepa-
ration
1. 
Arrangement of Y-Bar, Head and
Table
Move the Y-Bar to the farthest position and bring the Head to the
cap position. Raise the Table to the highest position.
–
Power OFF
2. 
Main power OFF –
Covers
3.

Removal of the covers. Remove the following covers.
• Front Cover •Rear Cover-TB
6.1.1
Disassembly
and
Reassembly
4. 
Removal of the Tabel. Remove the Table. 6.3.3
5.

Replacement of Z-Driving Screw. Replace the Z-Driving Screw. 6.3.4
6. 
Mounting of the Table. Mount the Table. 6.3.3
Power ON
7.

Main power ON –
Check
8. 
Check of Table up/down operation Execute [#TEST] -> [#AGEING].-> [Z SERVO] 4.2.6
Covers
9.

Mounting of the covers Mount the covers which have been removed. 6.1.1
Z-Driving Screw