MIMAKI UJF-3042 - Cn1[1; Power Supply PCB Assembly

© 2011 MIMAKI ENGINEERING CO.,LTD. 2.3.1 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Electrical Parts > Circuit Board Specifications > Power Supply PCB Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
2.3.1 Power Supply PCB Assy.
 Outline
Board name :Power Supply PCB Assy.
Mounted position :Main Control Unit part
 Main specifications
The power for each control and driving is supplied.
 List of Connectors
* For the details of connecting destinations, refer to the block dia-
gram.
 Fuse Rating
 Volume Specification
 Power supply confirmation point
Parts No. Pin Connected to:* Connecting des-
tination CN
Remarks
CN1 5 Noise Filter Input AC100–240V, 50/60Hz, 3.5A
CN2 10 Main PCB Assy. CN13 Output DC+35V / 6A, +5V / 3.5A, +3.3V / 3.5A
CN3 3 Main PCB Assy. CN15 Remote signal +5VSB 0.7A
Parts No. Rating Use voltage Remarks
F3 T6.3AH 250V AC100–240V AC input part
Parts No. Vo l t a g e Adjustable range
VR1 +35V +34.08V ~ +35.02V
VR2 +5V +4.98V ~ +5.02V
VR3 +3.3V +3.28V ~ +3.32V
Confirmation point DC Power Voltage Remarks
Parts No. Pin No.
CN2 1Pin, 2Pin +35V
CN2 5Pin, 6Pin +5V
CN2 9Pin, 10Pin +3.3V
CN3 1Pin +5VSB