MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.7 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Cartridge Coupling Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.2.7 Cartridge Coupling Assy.
 Procedures
1. Remove the Cap Nut, and pull of the Ink Tube.
2. Remove the nut and the fixing screws, and remove the Car-
tridge Coupling Assy..
3. Perform the assembly by reversing the disassembly procedure.
Be sure to wear Protective Glasses and Working Gloves during the work operation.Ink may get in your
eyes depending on the working condition, or hand skin may get rough if you touch the ink.
 Be sure to start the work after confirming the working process.
(Refer to “3.1.5 Replacement of Cartridge Coupling Assy.”)
 Take care not soil the surroundings.
Ink Tube
Cap Nut
O-ring (S4)
Take care not to stain any object by ink dripping and
also not to lose the O-ring.
Cartridge Coupling Assy.
Nut (M3)