MIMAKI UJF-3042 - 2011 Mimaki Engineering Co.,Ltd

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.5.4 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Disassembly and Reassembly > Sensors > Cover sensor
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver --- Remark
2.0
Rev.
6.5.4 Cover sensor
 Working Procedure
1. Turn the main power off.
2. Remove the Front cover.
3. Take the Micro SW-BKTL off .
4. Take the Sensor off.
• Disconnect the connector of the sensor.
• Remove two fixing screws.
5. Perform the assembly by reversing the disassembly procedure.
 To turn power off, be sure to turn the main power OFF.
Cover sensor
Micro SW-BKTL
Sensor
Connector
Fixing screw