© 2011 MIMAKI ENGINEERING CO.,LTD. 5.1.3 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Test > Test Items > SENSOR TEST
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
5.1.3 SENSOR TEST
Outline
Each sensor is tested.
List of SENSOR TEST
Name of Test Function LCD display
Cover Displaying the status of the Cover Sensor.
(The identification by the cover name is not possible. Because
each cover sensor for series connection.)
OPEN/CLOSE
Y -Org Displaying the status of the Y-origin Sensor. ON/OFF
X -Org Displaying the status of the X-origin Sensor . ON/OFF
Z-Org Displaying the status of the Z-origin Sensor (Table). ON/OFF
Wiper-Org Displaying the status of the Wiper Origin Sensor. ON/OFF
WorkHeight Displaying the status of the WorkHeight Limit Sensor. ON/OFF
InkCtrg 1 Displaying the status of the Ink Cartridge1 Sensor. ON/OFF
InkCtrg 2 Displaying the status of the Ink Cartridge2 Sensor. ON/OFF
InkCtrg 3 Displaying the status of the Ink Cartridge3 Sensor. ON/OFF
InkCtrg 4 Displaying the status of the Ink Cartridge4Sensor. ON/OFF
InkCtrg 5 Displaying the status of the Ink Cartridge5 Sensor. ON/OFF
InkCtrg 6 Displaying the status of the Ink Cartridge6 Sensor. ON/OFF
InkNear 1 Displaying the status of the Ink Near End Sensor.(color 1) OK/NEND
InkNear 2 Displaying the status of the Ink Near End Sensor.(color 2) OK/NEND
InkNear 3 Displaying the status of the Ink Near End Sensor.(color 3) OK/NEND
InkNear 4 Displaying the status of the Ink Near End Sensor.(color 4) OK/NEND
InkNear 5 Displaying the status of the Ink Near End Sensor.(color 5) OK/NEND
InkNear 6 Displaying the status of the Ink Near End Sensor.(color 6) OK/NEND
CoolFloat Displaying the status of the Float Sensor of water cooling device. ON/OFF
To Next Page
Loading...
