© 2011 MIMAKI ENGINEERING CO.,LTD. 3.2.2 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Workflow > Driving Parts > Replacement of Tabel Absorption Fan
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
3.2.2 Replacement of Tabel Absorption Fan
List of Replacement Procedures
Item Work operation Description Ref.
Advance prepa-
ration
1.
Arrangement of Y-Bar, Head and
Table
Move the Y-Bar to the farthest position and bring the Head to the
cap position. Raise the Table to the highest position.
–
Power OFF
2.
Main power OFF –
Covers
3.
Removal of the covers. Remove the following covers.
• Front Cover •Rear Cover-TB
6.1.1
Disassembly
and
Reassembly
4.
Removal of the Tabel. Remove the Table. 6.3.3
5.
Replacement of Table Absorption
Fan.
Replace the Table Absorption Fan. 6.3.7
6.
Mounting of the Table. Mount the Table. 6.3.3
Covers
7.
Mounting of the covers Mount the covers which have been removed. 6.1.1
Power ON
8.
Main power ON –
Table backside
Table Absorption Fan Assy
To Next Page
Loading...
