Minebea Intec PR5900 - Page 129

Weighing point D @admin
Weighing point not assigned
Save
Weighing point D @admin
Weighing point not assigned
Save
Not assigned
Internal weighing point
Liquid counter
User scale
xBPI scale
SBI scale
Pendeo Truck
Pendeo Process
PR-Net weighing point
Mettler-Scale
SMA scale
4.7.3.1 Parameters
In this menu item, the parameters of the user scale weighing electronics are congured.
Accessible via MENU - [Operating] - [System setup]- [Weighing points]- [Weighing
point x]- [Parameters] .
1. Conrm [Weighing point].
A selection window opens.
2. Select and conrm [User scale].
3. Press the [Save] soft key to save the settings.
WP-D R1 Max 1000kg d= 1kg
0
kg
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Pendeo Truck
xBPI scale
User scale
Parameters
The weighing electronics are now assigned to the weighing point.
4 System setup Process Controller Maxxis 5 PR 5900
EN-127 Minebea Intec