Minebea Intec PR5900 - Page 135

Weighing point C @admin
Weighing point not assigned
Save
Not assigned
Internal weighing point
Liquid counter
User scale
xBPI scale
SBI scale
Pendeo Truck
Pendeo Process
PR-Net weighing point
Mettler-Scale
SMA scale
4.7.5.1 Interface (serial)
In this menu item, the parameters of the serial interface for the xBPI scale weighing
electronics are congured.
Accessible via MENU - [Operating] - [System setup] - [Weighing points] - [Weighing
point x] - [xBPI scale] - [Interface] .
WP-C Max 29.9kg d= 0.0005kg
00000
kg
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
xBPI scale
Liquid counter
Parameters Calib Units Setup
2. Select and conrm [xBPI scale].
3. Press the [Save] soft key to save the settings.
WP-C Max 29.9kg d= 0.0005kg
00000
kg
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
xBPI scale
Liquid counter
Parameters Calib Units Setup
The weighing electronics are now assigned to the weighing point.
1. In this case: Select and conrm [Weighing point C] with [xBPI scale].
A selection window opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-133 Minebea Intec