The functions of the ve softkeys below the graphic display are indicated in the
bottommost text line of the display. Softkey functions shown in gray cannot be selected
at the active menu level or with the current access privileges.
In the descriptions of operating sequences which entail the use of softkeys, the softkey
function to be selected is shown in square brackets; the softkey symbol is not displayed;
example: [Save].
2.1.3.3 Navigation key operation
Menu
The cursor keys, the and keys are used to navigate through the menus.
Parameters
Use the ▼/▲ cursor keys to select the individual parameters.
Use the key to conrm the selection.
The required values | texts are entered via the alphanumeric keys.
The key is used to check the ☑ box.
If the list of parameters is long, a vertical bar graph on the left (black and gray) shows
which part of the list is displayed.
An existing selection list is indicated by an arrow ▶ following it.
The parameter is selected using the key.
2.1.3.4 Operation via PC keys
The device can also be operated using a PC keyboard. The corresponding key assignment
is shown in the table below:
PC keyboard Front keypad
F1
F2
F3
F4
F5…F9 Softkey 1…5
F10
F11
F12
ESC
Cursor keys: ↑, ↓, ←, → ▲, ▼, ◀, ▶
Enter key: ↵
Backspace key: ←
Numeric keypad Alphanumeric keypad
2 Commissioning Process Controller Maxxis 5 PR 5900
EN-17 Minebea Intec
To Next Page
Loading...
