Minebea Intec PR5900 - Page 219

Weighing point C @admin
Weighing point not assigned
Save
Weighing point C @admin
Weighing point not assigned
Save
Not assigned
Internal weighing point
Liquid counter
User scale
xBPI scale
SBI scale
Pendeo Truck
Pendeo Process
PR-Net weighing point
Mettler-Scale
SMA scale
1. Conrm [Weighing point].
A selection window opens.
2. Select and conrm [Mettler-Scale].
3. Press the [Save] soft key to save the settings.
WP-C Max 1.2kg d= 0.0001kg
00000
kg
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
Mettler-Scale
Pendeo Process
Parameters
The weighing electronics are now assigned to the weighing point.
4 System setup Process Controller Maxxis 5 PR 5900
EN-217 Minebea Intec