License settings
=======================================
Board number : 354942727
OPC server license : 9268010
Dosing license : 6651793
Alibi license : 7803550
Application license : 4886130
Developer license
Weighing point A : Internal weighing point
=======================================
Serial number : 408966395
Last change :2012-10-09 08:45:49
Calibration check number : 0093444057
Max : 3000.0 g
30000 d
Scale interval : 0.1 g
Dead load at : +0.040416 mV/V
102.983 g
Max at : +1.177344 mV/V
3000.000 g
calibrated at : 2516.5 g
+0.987596 mV/V
Sensitivity : 98.11 cnt/d
0.470938 uV/d
Units
---------------------------------------
Number of units: 1 weight unit
Parameters
---------------------------------------
Settings locked: off
W&M : none
Measurement time : 160 ms
Digital filter : no filter
External load cell supply: below or equal 8 V
Standstill time : 0.50 s
Standstill range : 1.00 d
Tare timeout : 2.5 s
Zeroset range : 50.00 d
Zerotrack: No
Overload : 9 d
Minimum weight : 20 d
Range mode : single range
10 Printouts Process Controller Maxxis 5 PR 5900
EN-373 Minebea Intec
To Next Page
Loading...
