Minebea Intec PR5900 - Page 376

Weighing point B : Internal weighing point
=======================================
Serial number : 409751827
Last change : --
Calibration check number : --
Max : 3000 kg
3000 d
Scale interval : 1 kg
Dead load at : +0.000000 mV/V
Max at : +1.000000 mV/V
not calibrated
Sensitivity : 833.33 cnt/d
4.000000 uV/d
Units
---------------------------------------
Number of units: 1 weight unit
Parameters
---------------------------------------
Settings locked: off
W&M : none
Measurement time : 160 ms
Digital filter : no filter
External load cell supply: below or equal 8 V
Standstill time : 0.50 s
Standstill range : 1.00 d
Tare timeout : 2.5 s
Zeroset range : 50.00 d
Zerotrack: No
Overload : 9 d
Minimum weight : 20 d
Range mode : single range
Weighing point C : not assigned
=======================================
Weighing point D : xBPI scale
=======================================
Weighing point D : xBPI scale
Settings locked: off
W&M : none
Tare timeout : 2.0 s
Serial number : 0
SBN address : 0
Process Controller Maxxis 5 PR 5900 10 Printouts
Minebea Intec EN-374