ERROR RECOVERY MENU
Select error recovery option
Restore last software from SD-Card
Listen for FlashIt!
Coldstart in safe mode
The device starts in a mode where all settings (even language settings) are ignored.
Safe mode activated
All settings have been ignored until now.
In the maintenance level you can
-[Export a service report]
To record the faulty conditions for later inspection.
-[Backup settings]
Although setting were not loaded, you can make a
backup for later review.
-[Restore settings]
Load settings from another backup to return the device
to some wellknown settings.
-[Factory reset]
System maintenance (safe mode)
Backup
Restore
Export
Import
Alibi memory maintenance
SC card maintenance
Create service report
Shutdown & Power off
Update software
Factory reset
Test hardware
The rest of the procedure is described in Chapter 6.
1. Select [Cold start in safe mode] with the ▼ key and conrm with the ► key/OK.
A help window appears.
2. Press the EXIT key to close the help window and switch to the system maintenance
menu (ERROR RECOVERY menu).
3. Select the desired menu item with the ▼ key and conrm with the ► key/OK.
4. Press the EXIT key to exit the system maintenance menu (ERROR RECOVERY menu).
A prompt window appears.
3 Operation and control Process Controller Maxxis 5 PR 5900
EN-53 Minebea Intec
To Next Page
Loading...
