Minebea Intec PR5900 - Network Parameters Configuration

System setup @admin
Connected devices
Date & Time
Operating parameters
Network parameters
Network share connections
Fieldbus parameters
Weighing points
Display settings
License settings
User management
Alibi memory
Network parameters @admin
A
B
C
HW address
Host name
use DHCP
IP address
Subnet mask
Default gateway
Remote access
Web server enabled
VNC access enabled
VNC client
VNC password
00:90:6C:27:FF:07
PR5900-27FF07
172.24.20.111
255.255.240.0
172.24.16.1
255.255.255.255
********
Default Save
Inactive parameters are grayed out.
[HW address]
Fixed address determined by the device.
[Host name]
NOTICE
The host name must be unique in the network!
Always follow the IT security guidelines.
Use unique host names.
The user-dened device name is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24.
- The rst character must be a letter. Spaces are not permitted.
- 0-9, A-Z (not case-sensitive) are permitted.
- – or . may be included, but neither at the end nor in succession.
Input: via keyboard
1. Select and conrm [Network parameters].
A selection window opens.
2. Select the individual parameters and conrm.
4 System setup Process Controller Maxxis 5 PR 5900
EN-81 Minebea Intec