MR TAPCON - Page 105

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 1053587317/21 EN TAPCON
®
Transmission procedure
You can use this parameter to set the transmission procedure. You can se-
lect the following options:
▪ Unbalanced transmission
▪ Balanced transmission
Number of link address octets
You can use this parameter to set how many octets are provided for the link
address.
Link address
You can use this parameter to set the link address.
Number of ASDU address octets
You can use this parameter to set how many octets are provided for the
ASDU address.
ASDU address
You can use this parameter to set the address of the ASDU.
No. of information object address octets
You can use this parameter to set how many octets are provided for the in-
formation object address.
Number of cause of transmission octets
You can use this parameter to set how many octets are provided for the
cause of transmission.
Number of data bits
You can use this parameter to set the number of databits.
Parity
You can use this parameter to set the parity. You can select the following
options:
▪ None
▪ Even
▪ Odd
Number of stop bits
You can use this parameter to set the number of stop bits.