MR TAPCON - Setting Access Rights to Parameters and Events

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 2453587317/21 EN TAPCON
®
Deleting user
To delete an existing user, proceed as follows:
1. Go to Settings > Administration > User.
2. In the list, select the button for the desired user.
3. Press the Accept button to delete the user.
8.26.4 Setting access rights to parameters and events
You can configure access rights to parameters and events for the available
roles. The following options are available for this purpose:
▪ Read: Parameter/event may be displayed.
▪ Write: Parameter/event may be modified.
▪ Acknowledge: Event may be acknowledged.
Figure173: Setting access rights for an event
You can only change access rights if you are assigned an administrator
role.
When in delivery status, you can log in as the administrator as follows:
▪ User name: admin
▪ Password: admin
To set the access rights to parameters and events, proceed as follows:
1. Go to Settings > Administration > Parameters/events.
ð A list of all parameters or events appears.
2. Select the desired entry in the list.
3. Select the options you want.
4. Press the Accept button to save the change.