MR TAPCON - Performance Features

4 Product description
Maschinenfabrik Reinhausen GmbH 2020 253587317/21 EN TAPCON
®
4.4 Performance features
The device features the following functions:
▪ Automatic voltage regulation
▪ 1 desired value
▪ 3 desired values
▪ 5 desired values
▪ Analog setting of the desired value
▪ Step-by-step setting of the desired value
▪ Active power-dependent adjustment of desired voltage value (TDSC)
▪ Active power-dependent adjustment of desired voltage value with 3 differ-
ent desired values (TDSC)
▪ Desired value setting via BCD
▪ Line drop compensation
– R&X compensation: compensation for voltage drops on the line
– Z compensation: compensation for voltage fluctuations in the meshed
grid
▪ Integrated monitoring functions:
– Voltage monitoring
– Current monitoring
– Apparent power monitoring
– Active power monitoring
– Reactive power monitoring
– Power factor monitoring
▪ Display of all measured values such as voltage, current, active power, ap-
parent power and reactive power
▪ Tap position capture via BCD code
▪ Tap position capture via analog signals (4...20 mA)
▪ Tap position capture via analog signals (0...20 mA)
▪ Tap position capture via analog signals (0...10 V)
▪ Tap position capture via N/O contact series
▪ Tap position capture via resistor contact series
▪ Tap position capture via dual code
▪ Tap position capture via decadic contact series
▪ Tap position capture via gray code
▪ Parallel operation of up to 16 transformers in 2 groups using the following
methods:
– Master/follower
– Circulating reactive current minimization