MR TAPCON - Parallel Operation

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 2493587317/21 EN TAPCON
®
► Go to Information > System > Software.
8.27.3 Parallel operation
In the parallel operation menu, you can display information about the de-
vices that are connected by CAN bus.
Description
Parallel operation status:
▪ Gray = Independent mode
▪ Blue = Parallel operation is active
▪ Red = Parallel operation error
CAN addr. CAN bus address
Grp. Parallel operation group
Method Active parallel operation method
Current tap position
U[V] Voltage
I_p [%] Active current
I_q [%] Reactive curr.
Blocking:
▪ Gray: Parallel operation not blocked
▪ Red: Parallel operation blocked
Table88: Information about parallel operation
Figure177: Parallel operation
► Go to Information > On-load tap-changer regulator > Parallel opera-
tion.