MR TAPCON - Setting the Language

7 Commissioning
Maschinenfabrik Reinhausen GmbH 202078 3587317/21 ENTAPCON
®
Figure66: Sample dielectric test set-up for a device designed with the G1 (PULS) power supply
7.2 Setting the language
You can use this parameter to set the display language for the device. The
device comes with a maximum of four languages.
English Italian*
German Portuguese*
French* Russian*
Spanish* Chinese*
Korean* Polish*
Table18: Available display languages
*) Language is available as an option
1. Select the Language button in the status bar, or as an alternative, go to
Settings> System > General > Language.
Figure67: Setting the language
2. Select the desired language from the list box.
3. Press the Accept button to save the modified parameter.
ð The "Restart device" dialog appears.
4. Restart the device to apply the changed language setting.