MR TAPCON - User Roles

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 2413587317/21 EN TAPCON
®
8.26.1 User roles
The access rights to device functions and settings are controlled using a hi-
erarchical system of roles. The system has 5 different roles with different ac-
cess rights. Some of these access rights are fixed, but you can configure the
access rights to particular parameters and events. Note the Setting access
rights to parameters and events [►Section 8.26.4, Page 245] section.
If you are not logged in on the device, you will assume the "Data display"
user role.
Upon delivery, the following roles are provided:
Role Description
Data display User who can only view data of relevance to operation.
▪ Display all parameters
▪ Display all events
Diagnostics User who can view data and log data of relevance to oper-
ation.
▪ Display all parameters
▪ Display all events
▪ Export log data
Operator User who can view data of relevance to operation and ac-
knowledge events. The user can perform manual tap-
change operations using the device's controls.
▪ Display all parameters
▪ Display and acknowledge all events
Parameter configura-
tor
User who can view and modify data of relevance to opera-
tion.
▪ Display and modify all parameters
▪ Import and export parameters
▪ Display, modify, and acknowledge all events
Administrator User who can view and modify all data.
▪ Read all parameters
▪ Display, modify, and acknowledge all events
Table86: Roles in delivery status
Access to the following areas of the device is linked to the roles:
Function Data display Diagnostics Operator Parameter
configurator
Administrator
Administration - - - - +
Restart device - - + + +
Import - - - + +
Export - + - + +