8 Operation
Maschinenfabrik Reinhausen GmbH 2020 1293587317/21 EN TAPCON
®
Follower parallel operation method
If the assigned event is active, the device activates the follower parallel oper-
ation method.
Automatic tap synchronization parallel operation method
If the assigned event is active, the device activates the automatic tap syn-
chronization parallel operation method.
Independent regulation
If the assigned event is active, the device activates the independent regula-
tion independent mode.
Deactivate parallel operation
If the assigned event is active, the device deactivates the parallel operation.
Blocking
If the assigned event is active, automatic control is blocked.
Activate remote mode
If the assigned event is active, the device activates remote mode.
High-speed return
If the assigned event is active, the device activates high-speed return. With
high-speed return, the device ignores the set delay time of automatic voltage
regulation.
Target-tap-position operation
If the assigned event is active, the device switches to the defined target tap
position.
Activate desired value 1
If the assigned event is active, the device activates the desired value 1.
Activate desired value 2
If the assigned event is active, the device activates the desired value 2.
Activate desired value 3
If the assigned event is active, the device activates the desired value 3.
Activate desired value 4
If the assigned event is active, the device activates the desired value 4.
To Next Page
Loading...
