MR TAPCON - Page 231

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 2313587317/21 EN TAPCON
®
Confirming maintenance
To confirm maintenance, proceed as follows:
1. Go to Settings > Maintenance wizard.
Figure161: Maintenance wizard
2. Select the maintenance to be confirmed.
3. Press the Next button.
4. Enter the maintenance parameters.
Figure162: Undertaking and confirming maintenance
5. Press the Accept button to save the changed parameters.
ð Only for OILTAP®: A prompt appears asking if the contacts were ex-
changed or replaced.
6. Only for OILTAP®: Press Yes or No to confirm the prompt.