MR TAPCON - Page 311

14 Overview of parameters
Maschinenfabrik Reinhausen GmbH 2020 3113587317/21 EN TAPCON
®
Parameter Setting range Factory setting Current setting
Target-tap-position operation - 500
Activate desired value 1 - 500
Activate desired value 2 - 500
Activate desired value 3 - 500
Activate desired value 4 - 500
Activate desired value 5 - 500
Increase desired value - 500
Decrease desired value - 500
Settings > Parameters > Screensaver
Screensaver Off, On On
Screensaver waiting time 1...36,000 min 5min
Dimming Off, On On
Dimming waiting time 1...36,000 min 3min
Brightness dimming 10...100% 50%
Settings > Calibrate hardware > Tap pos. capture
Pos. at max. analog signal -128...128 In accordance with order
Pos. at min. analog signal -128...128 In accordance with order
Table127: Overview of parameters
1
Availability of the parameter depends on device configuration.
2
After changing the parameter, you must restart the device for the change to
take effect.